.jpg)
Drag to rotate • Click to zoom
In a world where hydration plays a vital role in our health and well-being, the ALKIN SUPER (HOT+COLD+NORMAL) water cooler stands out as an exceptional choice for homes and offices in India. This feature-packed water cooler not only provides hot and cold water but also offers potentially alkaline water, ensuring that you and your family stay refreshed and hydrated at all times. Let’s explore the numerous benefits and specifications of this remarkable product.
Inclusive of all taxes • Free Shipping
30 LPH RO + UF Purification with Hot, Cold and Normal Water Dispensing
ALKIN SUPER (HOT + COLD + NORMAL) is a floor-standing water dispenser designed for homes, offices and suitable shared-use environments that require hot, chilled and normal purified water from one integrated system.
The supplied specifications list a purification capacity of up to 30 litres per hour, 20-litre storage capacity and suitability for brackish or tap water.
The system combines sediment filtration, carbon-block filtration, an ultrafiltration membrane, a Thin Film Composite RO membrane, automatic flushing and an inbuilt TDS controller.
Its ABS food-grade plastic body, floor-standing format, direct water-supply connection, intelligent temperature control and 230V AC power input create a complete hot, cold and normal water solution.
Supports reduction of suspended particles from incoming brackish or tap water.
Provides a carbon-treatment stage before membrane purification.
Adds an ultrafiltration stage within the listed purification system.
Uses a Thin Film Composite RO 1812-75GPD membrane for dissolved-impurity reduction.
The dispenser is designed to provide three water-temperature options from one floor-standing unit, allowing users to select hot, chilled or normal water according to daily needs.
Suitable for preparing tea, coffee and other hot beverages according to the product instructions.
Integrated refrigeration supports chilled-water dispensing for refreshing everyday use.
Provides normal-temperature purified water without requiring separate storage bottles.
ALKIN SUPER (HOT + COLD + NORMAL) includes a dedicated refrigeration system with a listed cooling capacity of 755 BTU per hour, subject to a ±5% tolerance.
The cooling system uses a THK9384YCG compressor from Tecumseh or an equivalent model. The supplied content also describes intelligent double-protection temperature control with a listed chilled-water range of 7°C to 17°C.
A capillary tube is used as the expansion device, while the evaporator is listed as a coil-type design.
Provides an internal reserve of purified water for regular dispensing.
Designed as an independent dispenser without wall mounting.
Uses the listed food-grade plastic body material.
The supplied specification lists a total weight of 34 kilograms.
Suitable for kitchens, common areas and other convenient floor locations.
Maintain clearance for filters, cooling components and maintenance.
The supplied product content describes Mineral RO technology with an inbuilt TDS controller.
The controller supports adjustment of the purified-water mineral level and taste according to incoming-water quality and the installed setting.
Final output TDS can vary with source-water TDS, membrane condition, flow and controller adjustment.
The supplied specifications include an automatic flushing system designed to support routine RO membrane flushing.
Flushing is handled by the purifier during configured cycles.
Helps support regular RO membrane operation.
Auto flushing does not replace filter or membrane maintenance.
The listed inlet-pressure range is 0.3 to 3 kg/cm². Water pressure should remain within this range for suitable purifier operation.
Actual purification rate can vary with source-water TDS, temperature, pressure, filter condition and membrane condition.
A source-water test is recommended before installation so the system configuration and service schedule can be planned correctly.
The unit uses a 230V AC power supply at 50/60 Hz.
The supplied specification lists a 24V DC booster-pump voltage.
The listed rated current is 1.8 amperes.
The cooling system is listed under temperature class ST.
Uses an integrated compressor-based refrigeration system.
Uses forced-convection air cooling with an axial-flow fan.
Specifications are displayed in equal-width cards so the complete page width is used without a stretched table column.
Model
ALKIN SUPER (HOT + COLD + NORMAL)
Applications
Suitable for brackish and tap water
Purification Capacity
Up to 30 litres per hour
Body Material
ABS food-grade plastic
Installation
Floor standing
Storage Capacity
20 litres
Dispensing Options
Hot, cold and normal water
Temperature Control
Double-protection controller; listed cold range 7°C to 17°C
TDS Control
Inbuilt TDS controller
Minimum Inlet Pressure
0.3 kg/cm² / 29,419.95 Pa
Maximum Inlet Pressure
3 kg/cm² / 294,199.5 Pa
Filter Cartridges
Sediment and carbon block
UF Filter
Ultrafiltration membrane
Auto Flushing
Yes
RO Membrane
Thin Film Composite RO 1812-75GPD
Booster Pump Voltage
24V DC
Rated Current
1.8 Amp
Cooling Capacity
755 BTU/hr ±5%
Compressor
THK9384YCG, Tecumseh make or equivalent
Temperature Class
ST
Refrigerant
R134a
Refrigerant Mass
90 g
Condenser
Forced-convection air cooled
Condenser Fan
Axial-flow type
Expansion Device
Capillary tube
Evaporator
Coil type
Weight
38.0 kg
Input Power Supply
230V AC, 50/60 Hz
Combines sediment, carbon, UF and RO stages.
Supports regular family and shared-area water requirements.
Keeps purified water available for dispensing.
Provides integrated compressor-based cooling.
Requires no wall mounting and supports independent placement.
Supports routine RO membrane flushing.
Uses ABS food-grade plastic construction.
Eliminates the need for replaceable dispenser bottles.
Suitable for the listed source-water categories.
The supplied specification lists up to 30 litres per hour.
The listed storage capacity is 20 litres.
The dispenser provides hot, chilled and normal water.
Brackish and tap water are listed as suitable applications.
No. It is listed as a floor-standing dispenser.
The body is listed as ABS food-grade plastic.
Sediment, carbon block, UF and RO stages are listed.
Yes. An automatic flushing system is included.
A Thin Film Composite RO 1812-75GPD membrane is listed.
The supplied specification lists 755 BTU/hr with ±5% tolerance.
R134a refrigerant with a listed mass of 90 g is used.
THK9384YCG, Tecumseh make or equivalent.
The listed input is 230V AC, 50/60 Hz.
The supplied specification lists 38.0 kg.
The listed inlet-pressure range is 0.3 to 3 kg/cm².
No. The supplied content describes a direct connection to the water supply.
Yes. Output varies with inlet pressure, source water, filters, membrane condition and temperature.
| Brand | Alkin Water |
| Model | ALKIN SUPER(HOT+COLD+NORMAL) |
| Capacity | As per variant |
0 Verified Reviews
No reviews yet. Be the first to review!