Swipe / drag to rotate • Tap image to view fullscreen
Inclusive of all taxes • Free Shipping
30 LPH RO Purification with TDS Control and Auto Flushing
ALKIN Super 30 is a compact commercial RO water purifier designed for homes, schools, offices, nursing homes, hotels and light commercial environments.
The supplied specifications list a purification production rate of 30 litres per hour and a maximum duty cycle of 150 litres per day.
The purifier uses sediment and activated-carbon filtration together with two Thin Film Composite RO membranes, TDS control and an automatic flushing system.
Its ABS food-grade plastic body, wall-mounted format and compatibility with water coolers make it suitable for locations where dependable output and compact installation are required.
Supports regular household drinking and suitable kitchen-water requirements.
Provides purified water for students, staff and shared drinking points.
Suitable for staff pantry and common drinking-water areas.
Can support suitable pantry, staff and shared-facility requirements.
Relevant for small hospitality properties with steady purified-water demand.
Suitable for businesses requiring compact and dependable RO purification.
Supports reduction of suspended particles from incoming water.
Provides the listed carbon-treatment stage before RO purification.
Two Thin Film Composite RO membranes support dissolved-impurity reduction.
Supports adjustment of mineral levels according to system configuration.
The purifier uses RO technology to process suitable brackish, tap and municipal corporation water.
The TDS controller supports adjustment of the purified-water mineral level and taste according to the installed configuration and incoming-water quality.
Actual output TDS depends on source water, membrane condition, controller setting and maintenance.
An automatic flushing system is included in the supplied specifications. This function supports routine flushing of the RO membranes during configured operating cycles.
Flushing is handled automatically by the purifier.
The function supports regular RO membrane operation.
Auto flushing does not replace scheduled filter and membrane service.
The purifier uses an ABS food-grade plastic body and is designed for wall-mounted installation.
The listed dimensions are 415 mm in length, 222 mm in width and 410 mm in height. The listed net weight is 14.2 kg.
Its compact format is suitable for installation near compatible water coolers or in utility areas with limited space.
0.3 kg/cm² or 4.3 psi.
3 kg/cm² or 42.7 psi.
10°C or 50°F.
40°C or 104°F.
20 to 150 psi.
2 to 11 according to the supplied specification.
Specifications are displayed in equal-width cards so the full page width is used without a stretched table column.
Model
ALKIN SUPER 30
Applications
Brackish, tap and municipal corporation water
Installation
Suitable as attachment to water coolers
Body Material
ABS food-grade plastic
Mounting
Wall mounted
Production Rate
30 litres per hour
Maximum Duty Cycle
150 litres per day
Filter Cartridges
Sediment and activated carbon
Membrane Type
Thin Film Composite RO, quantity 2
Auto Flushing
Yes
Minimum Inlet Condition
0.3 kg/cm² / 4.3 psi and 10°C / 50°F
Maximum Inlet Condition
3 kg/cm² / 42.7 psi and 40°C / 104°F
Working Pressure
20 to 150 psi
Operating pH
2 to 11
Power Consumption
60 watts
Dimensions
415 × 222 × 410 mm
Net Weight
14.2 kg
Input Power Supply
Single phase 100–250 V AC, 50 Hz
Supports steady daily purified-water requirements.
Suitable for light commercial and institutional use.
Uses two Thin Film Composite RO membranes.
Supports mineral-level and taste management.
Supports routine RO membrane flushing.
Wall mounting helps preserve available space.
The listed total power consumption is 60 watts.
Supports single-phase 100–250 V AC input.
Suitable for homes, schools, offices, hotels and similar sites.
The listed production rate is 30 litres per hour.
The supplied specification lists 150 litres per day.
Brackish, tap and municipal corporation water are listed.
Yes. It is listed as suitable for water-cooler attachment.
The listed body material is ABS food-grade plastic.
Yes. Wall mounting is listed in the technical specifications.
Sediment and activated-carbon cartridges are listed.
Two Thin Film Composite RO membranes are listed.
Yes. An automatic flushing system is included.
The listed range is 20 to 150 psi.
The supplied specification lists pH 2 to 11.
The listed total power consumption is 60 watts.
The listed dimensions are 415 × 222 × 410 mm.
The supplied specification lists 14.2 kg.
Single-phase 100–250 V AC, 50 Hz.
Yes. Output varies with pressure, source water, filters, membranes and maintenance.
| Applications | Suitable for Purification of Brackish/Tap, Municipal Corporation Water |
| Installation | Suitable as attachment to water coolers |
| Technology | RO + UF + Alkaline |
| Purification Capacity | Up to 30 LPH* |
| Weight | 14.2 kg |
| Power Consumption | 30 W |
| Membrane Type | Thin Film Composite RO |
| Input Power Supply | Single Phase 100–250V AC, 50 Hz |
| MRP | ₹32,500/- |
52 Verified Reviews