Swipe / drag to rotate • Tap image to view fullscreen
In today’s water-centric world, dealing with hard water can be a significant challenge for both residential and commercial properties. Hard water is notorious for causing scaling, staining, and decreased efficiency in appliances, leading to frustration and increased costs. If you’re tired of battling these issues, the Alkin AWS 4000 Water Softener is designed to revolutionize your experience. This high-capacity system effectively tackles hard water, providing soft, clean water that significantly enhances your property.
Inclusive of all taxes • Free Shipping
Up to 4000 LPH Softening with Automatic Valve Control and 125-Litre NFS-Certified Resin
ALKIN Auto Soft 800 is an automatic water-softening system designed for homes and suitable light-commercial environments affected by hard water.
The supplied specifications list a flow capacity of up to 4000 litres per hour, 125 litres of NFS-certified resin and a 200-litre brine tank.
The system uses an automatic top-mounting valve and regeneration cycle to support consistent soft-water production with reduced manual intervention.
At a stated hardness level of 200 ppm, the supplied content lists an output of 34,375 litres before regeneration conditions apply.
Incoming water enters the softener vessel through the automatic valve.
Water passes through the 125-litre resin bed designed for hardness reduction.
Treated water is supplied to the connected household or facility plumbing.
The system uses salt from the brine tank to regenerate the resin when required.
ALKIN Auto Soft 800 includes an automatic valve that controls the softening and regeneration process.
During regeneration, the system uses brine prepared from the connected salt tank to restore the working condition of the resin bed.
Regeneration frequency depends on incoming-water hardness, daily water usage, resin condition and system settings.
Softened water can help reduce hardness-related deposits in suitable pipes, fittings and appliances.
Reduced hardness can help limit visible mineral spotting on suitable glassware and utensils.
Soap and detergent can perform more effectively in softened water.
Softened water can support improved detergent performance during washing.
Hardness reduction can help limit mineral deposits on taps, showers and sanitary fittings.
Reduced scale formation may support better operating conditions for suitable water-using appliances.
The listed output of 34,375 litres applies at 200 ppm hardness according to the supplied specification.
Higher incoming hardness or higher daily consumption can shorten the time between regeneration cycles.
A source-water hardness test is recommended before installation so the system can be configured appropriately.
The listed vessel diameter is 350 mm or 14 inches.
The listed vessel height is 1350 mm or 65 inches.
The supplied specification lists an approximate system weight of 120 kg.
The MPV is mounted at the top of the vessel.
The system includes a 200-litre brine tank for regeneration salt.
The listed power consumption is 48 watts.
Suitable for central treatment before water enters internal plumbing.
Can support multiple bathrooms, utility areas and kitchen water lines.
Can be considered where the listed 4000 LPH flow matches expected demand.
Can support suitable operations affected by hard-water deposits.
Relevant for light hospitality water-softening requirements.
Suitable where water demand remains within the listed capacity.
Specifications are displayed in equal-width cards so the complete page width is used without a stretched table column.
Model
ALKIN AWS 4000
Valve Type
Automatic
Flow Capacity
Up to 4000 litres per hour
Vessel Diameter
350 mm / 14 inches
Vessel Height
1350 mm / 65 inches
Approximate Weight
120 kg
Resin Volume
125 litres, NFS certified
Salt per Regeneration
20 kg
Output at 200 ppm Hardness
34,375 litres
Brine Tank Capacity
200 litres
Power Consumption
48 watts
MPV Type
Top mounting
Supports suitable whole-home and light-commercial water demand.
Reduces the need for manual valve control.
Provides the listed softening-media volume.
Includes 200 litres of salt-storage capacity.
The listed electrical consumption is 48 watts.
Supports compact valve placement and servicing access.
Designed to reduce hardness-related mineral deposits.
Can be installed before water distribution to suitable internal lines.
Supports resin restoration using the brine tank.
The supplied specification lists up to 4000 litres per hour.
Yes. The listed valve type is automatic.
The system includes 125 litres of NFS-certified resin.
The listed brine tank capacity is 200 litres.
The supplied specification lists 20 kg.
The listed output is 34,375 litres.
The listed diameter is 350 mm or 14 inches.
The listed height is 1350 mm or 65 inches.
The supplied specification lists approximately 120 kg.
The listed power consumption is 48 watts.
The listed MPV type is top mounting.
Yes. Automatic regeneration is part of the supplied design.
Yes. It depends on hardness, water usage, resin condition and settings.
Yes. Correct plumbing, drainage and programming are important.
No. A water softener primarily targets hardness; it is not a complete drinking-water purifier.
Test the treated-water hardness and monitor regeneration frequency.
| Applications | Whole House Water Softener — converts hard water into soft water |
| Regeneration | Fully Automatic Regeneration System |
| Item Code | AWS4000 |
| Valve Type | AWST |
| Regeneration Mode | Automatic System |
| Resin Volume | 100 Ltr. NSF Certified |
| Flow Rate | 4000 LPH |
| Working Pressure | 7 Kg. Max |
| Power Supply | 220V, 50Hz |
| Inlet/Outlet Size | 1" |
| Brine Tank | 200 Ltr. |
| MRP | ₹156,500/- |
52 Verified Reviews