Alkin Reverse Osmosis Plants are designed and built to deliver water suitable for diverse utilization purposes and various industrial process requirements. They are ideal for small hotels, schools/ institutions, nursing homes, commercial establishments and light industries.
Inclusive of all taxes • Free Shipping
Explore the design, technology and real-world benefits behind this Alkin water solution.
Alkin Reverse Osmosis Plants are designed and built to deliver water suitable for diverse utilization purposes and various industrial process requirements. They are ideal for small hotels, schools/ institutions, nursing homes, commercial establishments and light industries.
2000 LPH RO System for Commercial and Institutional Water Demand
ALKIN Super 2000 is a high-capacity reverse-osmosis plant designed for small hotels, schools, nursing homes, commercial establishments and light industries.
The supplied specifications list a maximum and average flow of 2000 litres per hour, inlet TDS up to 2000 mg/L and permeate TDS below 100 mg/L.
The plant includes a 4500 LPH pressure sand filter, 4500 LPH activated carbon filter, antiscalant dosing, a 5-micron cartridge filter, a 3.9 kW high-pressure pump, an 8 × 40-inch RO membrane and UV treatment.
Its industrial footprint, 415 V three-phase supply and approximate 550 kg weight require professional site preparation, electrical infrastructure and commissioning.
Supports high-volume drinking and suitable service-water requirements.
Provides centralised purification for large user groups.
Can support appropriate pantry, staff and facility requirements.
Suitable for businesses with continuous purified-water demand.
Can be configured for suitable utility and process-water applications.
Supports shared water distribution for employees and visitors.
The plant includes separate pressure sand and activated carbon filtration stages, each with a listed capacity of 4500 litres per hour.
Pressure sand filtration supports suspended-solid reduction, while activated carbon treatment supports chlorine and organic-compound reduction before RO processing.
The listed high-pressure pump is rated at 4500 LPH and 3.9 kW.
The supplied specification lists an 8 × 40-inch RO membrane.
UV is listed as included in the technical specification.
The listed recovery rate is 30%. Recovery represents the proportion of feed water converted to permeate under the specified operating setup.
Actual recovery, permeate TDS and flow can vary according to raw-water chemistry, temperature, pressure, membrane condition and plant configuration.
ALKIN Super 2000 is a large industrial plant with listed dimensions of 3000 × 1000 × 1700 mm and approximate weight of 550 kg.
Requires adequate linear installation space.
Allow additional side clearance for maintenance.
Verify vertical clearance before installation.
Install on a stable, level and load-bearing floor.
Designed for commercial plant-room environments.
Maintain clearance for filters, pump and membrane servicing.
The plant requires a 415 V AC, three-phase, four-wire, 50 Hz electrical supply according to the supplied technical table.
Electrical installation, earthing, protection and commissioning should be completed by qualified professionals.
Specifications are presented in equal-width cards so the complete page width is used without a stretched table column.
Model
ALKIN SUPER 2000 / RO-2000
Maximum Flow
2000 LPH
Average Flow
2000 LPH
Inlet TDS
500–2000 mg/L maximum
Permeate TDS
Below 100 mg/L
Recovery
30%
Pressure Sand Filter
4500 LPH
Activated Carbon Filter
4500 LPH
Antiscalant Dosing
Yes
Dosing Tank
20 litres
Micron Cartridge
5 micron PP, 20 inches long
High-Pressure Pump
4500 LPH, 3.9 kW
RO Membrane
8 × 40 inches
UV
Yes
Plant Dimensions
3000 × 1000 × 1700 mm
Approximate Weight
550 kg
Power Supply
415 V AC, 3 phase, 4 wire, 50 Hz
Recommended Applications
Hotels, institutions, nursing homes, commercial sites and light industries
Designed for high-volume commercial purification.
Listed operating recovery under specified conditions.
Includes 4500 LPH PSF and ACF stages.
Supports membrane scale-management requirements.
Provides high-pressure feed to the RO membrane.
Adds a listed UV treatment stage.
Built for dedicated plant-room installations.
Uses 415 V AC industrial power supply.
Relevant for hospitality, education, healthcare and light industry.
The maximum and average listed flow is 2000 LPH.
The supplied specification lists 500–2000 mg/L maximum.
The listed permeate TDS is below 100 mg/L.
The technical specification lists 30% recovery.
The pressure sand filter capacity is listed as 4500 LPH.
The activated carbon filter capacity is listed as 4500 LPH.
Yes. A dosing system and 20-litre tank are listed.
A 5-micron PP cartridge, 20 inches long, is listed.
The listed pump is 4500 LPH and 3.9 kW.
The listed RO membrane size is 8 × 40 inches.
Yes. UV is listed as included.
The listed dimensions are 3000 × 1000 × 1700 mm.
The supplied specification lists approximately 550 kg.
415 V AC, three phase, four wire and 50 Hz.
Professional industrial installation is strongly recommended.
Yes. Flow, recovery and TDS depend on feed water, temperature, pressure and maintenance.
Add two direct MP4/WebM links in $productVideoLinks; every product keeps these two slots.
Paste a direct landscape video link to activate this slot.
Paste a direct landscape video link to activate this slot.
Everything important about ALKIN SUPER 2000, organised for quick scanning.
| 01Brand | Alkin Water |
| 02Model | ALKIN SUPER 2000 |
| 03Capacity | As per variant — contact us for the detailed spec sheet |
Detailed spec sheet for this model isn't in our digital catalog yet — call our team and we'll send it over.
See what customers are saying about their Alkin water solution.
Share your honest feedback after using this product.
Smartly matched Alkin products to complete your home, office or industrial setup.
