Swipe / drag to rotate • Tap image to view fullscreen
Alkin Super 100 is a high-performance alkaline RO water purifier designed for commercial and heavy usage, delivering up to 100 LPH with advanced RO+UF purification. It ensures safe, mineral-rich drinking water with durable build, efficient filtration, and reliable high-capacity performance
Inclusive of all taxes • Free Shipping
100 LPH Water Purification for Large-Demand Applications
ALKIN Super 100 is a high-capacity water purification system designed for locations that need a dependable supply of purified water throughout the day.
The supplied specifications list a production rate of 100 litres per hour and a maximum duty cycle of 500 litres per day. This makes it suitable for large families, offices, restaurants and commercial environments.
The purifier uses a Thin Film Composite RO membrane, sediment filtration, activated carbon, post carbon and a TDS controller. An auto-flushing system is also included.
Its stainless-steel body, wall-mounted design and water-cooler attachment compatibility make it suitable for practical high-volume installations.
The listed production rate of ALKIN Super 100 is 100 litres per hour. This capacity is suitable for locations where a standard household purifier may not provide enough output.
The maximum listed duty cycle is 500 litres per day. This defines the stated daily operating capacity under suitable conditions.
Actual output may vary according to inlet-water pressure, source-water TDS, temperature, filter condition, membrane condition and installation.
ALKIN Super 100 uses sediment, activated carbon, Thin Film Composite RO and post-carbon filtration. The TDS controller supports water-mineral management after RO purification.
Supports reduction of suspended particles from incoming water.
Provides a listed carbon-treatment stage before RO purification.
Supports reduction of dissolved salts and RO-reducible impurities.
Supports final water conditioning and mineral-level management.
The purifier uses a stainless-steel body according to the supplied specifications. This construction is suitable for demanding environments where a robust purifier housing is preferred.
The listed dimensions are 505 mm in length, 360 mm in width and 746 mm in height. The listed net weight is 33.2 kg.
The mounting surface must be suitable for the unit's weight and operating load. Professional installation is recommended.
ALKIN Super 100 is listed as a wall-mounted purifier and is suitable as an attachment to water coolers. This makes it relevant for shared purified-water points.
Keeps the purifier off the floor while supporting organised installation.
Can be connected with a suitable cooler or water-distribution arrangement.
Adequate space should remain available for cartridge and membrane servicing.
The supplied specification lists brackish water, tap water and municipal corporation water as suitable applications.
The RO membrane supports reduction of dissolved impurities from suitable brackish-water sources.
Suitable tap-water sources can be processed within the listed operating range.
Municipal corporation water is listed as a suitable source application.
An automatic flushing system is included in the supplied specifications. This feature supports routine flushing of the RO membrane during applicable operating cycles.
Flushing is handled by the system during configured operation.
The function supports regular RO membrane operation.
Auto flushing does not replace membrane, filter and system maintenance.
Supports staff and visitor drinking-water requirements.
Can support suitable drinking and kitchen water demand.
Relevant for shared high-demand water points.
Can be considered for suitable staff, pantry and public areas.
Supports employee water systems in large workplaces.
Can support shared purifier and cooler arrangements.
Specifications are displayed in equal-width cards so the complete page width is used without a stretched table column.
Model
ALKIN SUPER 100
Applications
Brackish, tap and municipal corporation water
Installation
Suitable as attachment to water coolers
Body Material
Stainless steel
Mounting
Wall mounted
Production Rate
100 litres per hour
Maximum Duty Cycle
500 litres per day
Filter Cartridges
Sediment, activated carbon and post carbon
Membrane Type
Thin Film Composite RO
Auto Flushing
Yes
Minimum Inlet Condition
0.3 kg/cm² pressure and 10°C
Maximum Inlet Condition
4 kg/cm² pressure and 40°C
Operating pH
6.5 to 8.0
Power Consumption
240 watts
Dimensions
505 × 360 × 746 mm
Net Weight
33.2 kg
Input Power Supply
Single phase 100–250 V AC, 50–60 Hz
Recommended Use
Commercial and high-demand residential installations
Provides high-volume purification for demanding locations.
Supports substantial daily purified-water requirements.
Provides a robust commercial installation format.
Uses a Thin Film Composite membrane for RO purification.
Supports automatic RO-system flushing.
Suitable for connection with compatible water coolers.
Supports organised installation in commercial spaces.
Supports single-phase 100–250 V AC input.
Suitable for listed brackish, tap and municipal water sources.
The listed production rate is 100 litres per hour.
The supplied specification lists 500 litres per day.
The listed body material is stainless steel.
Yes. Wall mounting is listed in the technical specifications.
Yes. It is listed as suitable for attachment to water coolers.
Sediment, activated carbon and post-carbon cartridges are listed.
The listed membrane is a Thin Film Composite RO membrane.
Yes. An automatic flushing system is included.
The listed range is 0.3 to 4 kg/cm².
The listed range is 10°C to 40°C.
The supplied specification lists 6.5 to 8.0.
The listed total power consumption is 240 watts.
The listed dimensions are 505 × 360 × 746 mm.
The supplied specification lists 33.2 kg.
The listed input is single phase 100–250 V AC, 50–60 Hz.
Brackish, tap and municipal corporation water are listed.
Yes. Output can vary with pressure, TDS, temperature, filters and membrane condition.
Yes. The purifier's weight, power and commercial output make professional installation advisable.
| Applications | Suitable for Purification of Brackish/Tap Water, Municipal Corporation Water |
| Installation | Suitable as attachment to water coolers |
| Technology | Sediment, Activated Carbon, UF & Post Carbon |
| Purification Production Rate | 100 L/hr |
| Maximum Duty Cycle | 500 L/Day |
| Membrane Type | Thin Film Composite RO |
| Total Power Consumption | 90 W |
| Net Weight | 33.2 kg |
| Input Power Supply | Single Phase 100–250V AC, 50–60 Hz |
| MRP | ₹75,000/- |
52 Verified Reviews