Swipe / drag to rotate • Tap image to view fullscreen
Is hard water wreaking havoc in your Indian home? From stubborn white stains on dishes to damaged pipes and frizzy hair, hard water can be a real nuisance. But fear not! The ALKIN AUTO SOFT 800 water softener in India is here to revolutionize your experience. With its advanced features and technology, this system transforms hard water into soft, clean water that benefits every aspect of your daily life.
Inclusive of all taxes • Free Shipping
Up to 800 LPH Softening with Automatic Regeneration and 50-Litre Resin
ALKIN Auto Soft 800 is an automatic water-softening system designed for homes and suitable light-commercial environments affected by hard water.
The supplied specifications list a flow capacity of up to 800 litres per hour, 50 litres of NFS-certified resin and a 60-litre brine tank.
The system uses an automatic top-mount valve and regeneration cycle to support continuous soft-water production with reduced manual operation.
At a stated hardness level of 200 ppm, the supplied content lists an output of 16,000 litres before regeneration conditions apply.
Incoming water enters the softener vessel through the automatic valve.
Water passes through the 50-litre resin bed designed for hardness reduction.
Treated water is supplied to the connected household or facility plumbing.
The system uses salt from the brine tank to regenerate the resin when required.
ALKIN Auto Soft 800 includes an automatic valve that controls the softening and regeneration process.
During regeneration, the system uses brine prepared from the connected salt tank to restore the working condition of the resin bed.
Regeneration frequency depends on incoming-water hardness, daily water usage, resin condition and system settings.
Softened water can help reduce hardness-related deposits in suitable pipes, fittings and appliances.
Reduced hardness can help limit visible mineral spotting on suitable glassware and utensils.
Soap and detergent can perform more effectively in softened water.
Softened water can support improved detergent performance during washing.
Hardness reduction can help limit mineral deposits on taps, showers and sanitary fittings.
Reduced scale formation may support better operating conditions for suitable water-using appliances.
The listed output of 16,000 litres applies at 200 ppm hardness according to the supplied specification.
Higher incoming hardness or higher daily consumption can shorten the time between regeneration cycles.
A source-water hardness test is recommended before installation so the system can be configured appropriately.
The listed vessel diameter is 250 mm or 10 inches.
The listed vessel height is 1200 mm or 47 inches.
The supplied specification lists an approximate system weight of 90 kg.
The MPV is mounted at the top of the vessel.
The system includes a 60-litre brine tank for regeneration salt.
The listed power consumption is 30 watts.
Suitable for central treatment before water enters internal plumbing.
Can support multiple bathrooms, utility areas and kitchen water lines.
Can be considered where the listed flow matches expected demand.
Can support suitable operations affected by hard-water deposits.
Relevant for light hospitality water-softening requirements.
Suitable where water demand remains within the listed capacity.
Specifications are displayed in equal-width cards so the complete page width is used without a stretched table column.
Model
ALKIN AUTO SOFT 800
Valve Type
Automatic
Flow Capacity
Up to 800 litres per hour
Vessel Diameter
250 mm / 10 inches
Vessel Height
1200 mm / 47 inches
Approximate Weight
90 kg
Resin Volume
50 litres, NFS certified
Salt per Regeneration
15 kg
Output at 200 ppm Hardness
16,000 litres
Brine Tank Capacity
60 litres
Power Consumption
30 watts
MPV Type
Top mount
Supports suitable whole-home and light-commercial water demand.
Reduces the need for manual valve control.
Provides the listed softening-media volume.
Includes 60 litres of salt-storage capacity.
The listed electrical consumption is 30 watts.
Supports compact valve placement and servicing access.
Designed to reduce hardness-related mineral deposits.
Can be installed before water distribution to suitable internal lines.
Supports resin restoration using the brine tank.
The supplied specification lists up to 800 litres per hour.
Yes. The listed valve type is automatic.
The system includes 50 litres of NFS-certified resin.
The listed brine tank capacity is 60 litres.
The supplied specification lists 15 kg.
The listed output is 16,000 litres.
The listed diameter is 250 mm or 10 inches.
The listed height is 1200 mm or 47 inches.
The supplied specification lists approximately 90 kg.
The listed power consumption is 30 watts.
The listed MPV type is top mount.
Yes. Automatic regeneration is part of the supplied design.
Yes. It depends on hardness, water usage, resin condition and settings.
Yes. Correct plumbing, drainage and programming are important.
No. A water softener primarily targets hardness; it is not a complete drinking-water purifier.
Test the treated-water hardness and monitor regeneration frequency.
| Applications | Whole House Water Softener — converts hard water into soft water |
| Regeneration | Fully Automatic Regeneration System |
| Item Code | AWS800 |
| MRP | ₹32,000/- |
52 Verified Reviews