Swipe / drag to rotate • Tap image to view fullscreen
Alkin Reverse Osmosis Plants are designed and built to deliver water suitable for diverse utilization purposes and various industrial process requirements. They are ideal for small hotels, schools/ institutions, nursing homes, commercial establishments and light industries.
Inclusive of all taxes • Free Shipping
200 LPH RO System for Commercial, Institutional and Light-Industrial Use
ALKIN Super 200 is a reverse-osmosis plant designed for small hotels, schools, nursing homes, commercial establishments and light industries.
The supplied specifications list a maximum and average flow of 200 litres per hour, inlet TDS from 500 to 1500 mg/L and a recovery rate of 20%.
The plant includes a 10-micron particulate filter, activated carbon block, antiscalant dosing system, 5-micron PP cartridge, 1.1 kW high-pressure pump and a 4 × 40-inch RO membrane.
With dimensions of 600 × 800 × 1640 mm and an approximate weight of 200 kg, the system requires professional installation and suitable three-phase electrical infrastructure.
Supports suitable drinking, pantry and facility water requirements.
Provides centralised purification for staff and students.
Can support suitable pantry and shared-facility requirements.
Designed for businesses with consistent purified-water demand.
Can support suitable utility and process-water applications.
Supports shared purified-water systems for employees and visitors.
The treatment arrangement begins with a 10-micron particulate filter designed to reduce suspended particles before water reaches the next stages.
A 4 × 20-inch activated carbon block supports chlorine and organic-compound reduction, while a 5-micron PP cartridge adds a finer filtration stage before the RO membrane.
The listed high-pressure pump has a 1000 LPH rating and 1.1 kW power.
The supplied specification lists a 4 × 40-inch RO membrane.
UV is listed as “No” in the technical specification and is not shown as a standard feature.
The listed recovery rate is 20%. Recovery represents the proportion of feed water converted into permeate under the plant's operating configuration.
Actual flow and recovery can vary according to raw-water chemistry, pressure, temperature, membrane condition and system maintenance.
Requires a suitable linear installation area.
Additional side clearance should remain available.
Verify vertical clearance before installation.
Install on a stable and load-bearing floor.
Designed for dedicated plant-room or utility-area placement.
Maintain access for filters, pump and membrane servicing.
The plant requires a 415 V AC, three-phase, four-wire, 50 Hz electrical supply according to the supplied specification.
Electrical installation, earthing, protection and commissioning should be completed by qualified professionals.
Specifications are presented in equal-width cards so the complete page width is used without a stretched table column.
Model
ALKIN SUPER 200 / RO-200
Maximum Flow
200 LPH
Average Flow
200 LPH
Inlet TDS
500–1500 mg/L maximum
Recovery
20%
Particulate Filter
10 micron, 4 × 20 inches
Activated Carbon Block
4 × 20 inches
Pressure Sand Filter
Not listed
Activated Carbon Filter
Not listed as a separate vessel
Antiscalant Dosing
Yes
Dosing Tank
20 litres
Micron Cartridge
5-micron PP, 20 inches long
High-Pressure Pump
1000 LPH, 1.1 kW
RO Membrane
4 × 40 inches
UV
No
Plant Dimensions
600 × 800 × 1640 mm
Approximate Weight
200 kg
Power Supply
415 V AC, 3 phase, 4 wire, 50 Hz
Designed for small and medium commercial water demand.
Listed recovery under the specified operating setup.
Includes particulate, carbon and micron-cartridge filtration.
Supports membrane scale-management requirements.
Provides high-pressure feed to the RO membrane.
Uses the listed industrial RO membrane size.
Designed for utility-area and plant-room installation.
Uses 415 V AC industrial electrical supply.
Relevant for hospitality, education, healthcare and light industry.
The maximum and average listed flow is 200 LPH.
The supplied specification lists 500–1500 mg/L maximum.
The technical specification lists 20% recovery.
A 10-micron, 4 × 20-inch particulate filter is listed.
A 4 × 20-inch activated carbon block is listed.
Yes. A dosing system and 20-litre tank are listed.
A 5-micron PP cartridge, 20 inches long, is listed.
The listed pump is 1000 LPH and 1.1 kW.
The listed RO membrane size is 4 × 40 inches.
No. UV is listed as “No” in the technical specification.
The listed dimensions are 600 × 800 × 1640 mm.
The supplied specification lists approximately 200 kg.
415 V AC, three phase, four wire and 50 Hz.
Yes. The plant requires professional industrial installation.
Yes. Flow and recovery depend on feed-water conditions, pressure and maintenance.
It is presented for hotels, schools, nursing homes, commercial sites and light industries.
| Brand | Alkin Water |
| Model | ALKIN SUPER 200 |
| Capacity | As per variant — contact us for the detailed spec sheet |
Detailed spec sheet for this model isn't in our digital catalog yet — call our team and we'll send it over.
52 Verified Reviews