Alkin Reverse Osmosis Plants are designed and built to deliver water suitable for diverse utilization purposes and various industrial process requirements. They are ideal for small hotels, schools/ institutions, nursing homes, commercial establishments and light industries.
Inclusive of all taxes • Free Shipping
Explore the design, technology and real-world benefits behind this Alkin water solution.
Alkin Reverse Osmosis Plants are designed and built to deliver water suitable for diverse utilization purposes and various industrial process requirements. They are ideal for small hotels, schools/ institutions, nursing homes, commercial establishments and light industries.
3000 LPH RO System for Commercial, Institutional and Light-Industrial Use
ALKIN Super 3000 is a large-capacity reverse-osmosis plant designed for small hotels, educational institutions, nursing homes, commercial establishments and light industries.
The supplied specifications list a maximum and average flow of 3000 litres per hour, inlet TDS from 500 to 2000 mg/L and permeate TDS below 100 mg/L.
The plant includes 6000 LPH pressure sand and activated carbon filters, antiscalant dosing, a jumbo 5-micron cartridge filter, a 5.2 kW high-pressure pump, an 8 × 40-inch RO membrane and UV treatment.
With listed dimensions of 4000 × 1000 × 1800 mm and an approximate weight of 650 kg, the system requires professional site planning, electrical preparation and commissioning.
Supports high-volume purified-water requirements across suitable facility areas.
Provides centralised purification for large student and staff populations.
Can support suitable pantry, staff and common-area water demand.
Relevant for businesses requiring continuous high-volume purification.
Can be configured for suitable utility and process-water applications.
Supports shared water-distribution systems for high user demand.
The plant uses separate pressure sand and activated carbon filtration stages, each with a listed capacity of 6000 litres per hour.
Pressure sand filtration supports suspended-solid reduction, while activated carbon treatment supports chlorine and organic-compound reduction before RO processing.
The listed high-pressure pump is rated at 6000 LPH and 5.2 kW.
The supplied specification lists an 8 × 40-inch RO membrane.
UV is listed as included in the system specification.
The listed recovery is 30%. Recovery represents the proportion of feed water converted into permeate under the specified operating setup.
Actual recovery, permeate quality and output can vary according to raw-water chemistry, temperature, pressure, membrane condition and plant configuration.
Requires adequate linear plant-room space.
Additional side clearance should be maintained.
Verify vertical clearance before installation.
Install on a stable and load-bearing floor.
Designed for dedicated plant-room environments.
Maintain access for pump, filters and membrane servicing.
The system requires a 415 V AC, three-phase, four-wire, 50 Hz electrical supply according to the supplied technical specification.
Electrical installation, earthing, protection and commissioning should be completed by qualified professionals.
Specifications are presented in equal-width cards so the complete page width is used without a stretched table column.
Model
ALKIN SUPER 3000 / RO-3000
Maximum Flow
3000 LPH
Average Flow
3000 LPH
Inlet TDS
500–2000 mg/L maximum
Permeate TDS
Below 100 mg/L
Recovery
30%
Pressure Sand Filter
6000 LPH
Activated Carbon Filter
6000 LPH
Antiscalant Dosing
Yes
Dosing Tank
50 litres
Micron Cartridge
5-micron jumbo PP, 20 inches long
High-Pressure Pump
6000 LPH, 5.2 kW
RO Membrane
8 × 40 inches
UV
Yes
Plant Dimensions
4000 × 1000 × 1800 mm
Approximate Weight
650 kg
Power Supply
415 V AC, 3 phase, 4 wire, 50 Hz
Applications
Hotels, institutions, nursing homes, commercial establishments and light industries
Designed for high-volume industrial purification.
Listed recovery under specified operating conditions.
Includes large PSF and ACF stages.
Supports the antiscalant dosing arrangement.
Provides high-pressure feed to the RO membrane.
Adds a listed UV treatment stage.
Built for dedicated plant-room installations.
Uses 415 V AC industrial electrical supply.
Relevant for hospitality, education, healthcare and light industry.
The maximum and average listed flow is 3000 LPH.
The supplied specification lists 500–2000 mg/L maximum.
The listed permeate TDS is below 100 mg/L.
The technical specification lists 30% recovery.
The pressure sand filter capacity is listed as 6000 LPH.
The activated carbon filter capacity is listed as 6000 LPH.
Yes. A dosing system and 50-litre tank are listed.
A 5-micron jumbo PP cartridge, 20 inches long, is listed.
The listed pump is 6000 LPH and 5.2 kW.
The listed RO membrane size is 8 × 40 inches.
Yes. UV is listed as included.
The listed dimensions are 4000 × 1000 × 1800 mm.
The supplied specification lists approximately 650 kg.
415 V AC, three phase, four wire and 50 Hz.
Professional industrial installation is strongly recommended.
Yes. Flow, recovery and TDS depend on feed water, temperature, pressure and maintenance.
Add two direct MP4/WebM links in $productVideoLinks; every product keeps these two slots.
Paste a direct landscape video link to activate this slot.
Paste a direct landscape video link to activate this slot.
Everything important about ALKIN SUPER 3000, organised for quick scanning.
| 01Brand | Alkin Water |
| 02Model | ALKIN SUPER 3000 |
| 03Capacity | As per variant — contact us for the detailed spec sheet |
Detailed spec sheet for this model isn't in our digital catalog yet — call our team and we'll send it over.
See what customers are saying about their Alkin water solution.
Share your honest feedback after using this product.
Smartly matched Alkin products to complete your home, office or industrial setup.
