Swipe / drag to rotate • Tap image to view fullscreen
Hard water can be a significant nuisance, causing a range of problems in homes and businesses alike. If you’re tired of battling the issues that come with hard water, it’s time to explore the benefits of the Alkin AWS 6000 water softener system. This powerful, high-capacity system is designed to tackle hard water head-on, delivering soft, clean water that makes a noticeable difference throughout your entire property.
Inclusive of all taxes • Free Shipping
Up to 6000 LPH Softening with Fully Automatic MPV and 150-Litre NFS-Certified Resin
ALKIN Auto Soft 800 is an automatic water-softening system designed for homes and suitable light-commercial environments affected by hard water.
The supplied specifications list a flow capacity of up to 6000 litres per hour, 150 litres of NFS-certified resin and a 120-litre brine tank.
The system uses an automatic top-mounting valve and regeneration cycle to support consistent soft-water production with reduced manual intervention.
At a stated hardness level of 200 ppm, the supplied content lists an output of 41,250 litres before regeneration conditions apply.
Incoming water enters the softener vessel through the automatic valve.
Water passes through the 150-litre resin bed designed for hardness reduction.
Treated water is supplied to the connected household or facility plumbing.
The system uses salt from the brine tank to regenerate the resin when required.
ALKIN Auto Soft 800 includes an automatic valve that controls the softening and regeneration process.
During regeneration, the system uses brine prepared in the connected salt tank to restore the working condition of the resin bed.
Regeneration frequency depends on incoming-water hardness, daily water usage, resin condition and system settings.
Softened water can help reduce hardness-related deposits in suitable pipes, fittings and appliances.
Reduced hardness can help limit visible mineral spotting on suitable glassware and utensils.
Soap and detergent can perform more effectively in softened water.
Softened water can support improved detergent performance during washing.
Hardness reduction can help limit mineral deposits on taps, showers and sanitary fittings.
Reduced scale formation may support better operating conditions for suitable water-using appliances.
The listed output of 41,250 litres applies at 200 ppm hardness according to the supplied specification.
Higher incoming hardness or higher daily consumption can shorten the time between regeneration cycles.
A source-water hardness test is recommended before installation so the system can be configured appropriately.
The listed vessel diameter is 400 mm or 16 inches.
The listed vessel height is 1400 mm or 65 inches.
The supplied specification lists an approximate system weight of 124 kg.
The MPV is mounted at the top of the vessel.
The system includes a 120-litre brine tank for regeneration salt.
The listed power consumption is 48 watts.
Suitable for central treatment before water enters internal plumbing.
Can support multiple bathrooms, utility areas and kitchen water lines.
Can be considered where the listed 6000 LPH flow matches expected demand.
Can support suitable operations affected by hard-water deposits.
Relevant for light hospitality water-softening requirements.
Suitable where water demand remains within the listed capacity.
Specifications are displayed in equal-width cards so the complete page width is used without a stretched table column.
Model
ALKIN AWS 6000
Valve Type
Automatic
Flow Capacity
Up to 6000 litres per hour
Vessel Diameter
400 mm / 16 inches
Vessel Height
1400 mm / 65 inches
Approximate Weight
124 kg
Resin Volume
150 litres, NFS certified
Salt per Regeneration
24 kg
Output at 200 ppm Hardness
41,250 litres
Brine Tank Capacity
120 litres
Power Consumption
48 watts
MPV Operation
Fully automatic
MPV Type
Top mounting
Body Material
FRP — Fiberglass Reinforced Plastic
Supports suitable whole-home and light-commercial water demand.
Reduces the need for automatic valve control.
Provides the listed softening-media volume.
Includes 120 litres of salt-storage capacity.
The listed electrical consumption is 48 watts.
Supports compact valve placement and servicing access.
Designed to reduce hardness-related mineral deposits.
Can be installed before water distribution to suitable internal lines.
Supports resin restoration through automatic brine regeneration.
The supplied specification lists up to 6000 litres per hour.
Yes. The listed valve type is automatic.
The system includes 150 litres of NFS-certified resin.
The listed brine tank capacity is 120 litres.
The supplied specification lists 24 kg.
The listed output is 41,250 litres.
The listed diameter is 400 mm or 16 inches.
The listed height is 1400 mm or 65 inches.
The supplied specification lists approximately 124 kg.
The listed power consumption is 48 watts.
The listed MPV type is top mounting.
No. The supplied specification lists a automatic valve, so regeneration is operator controlled.
Yes. It depends on hardness, water usage, resin condition and settings.
Yes. Correct plumbing, drainage and programming are important.
No. A water softener primarily targets hardness; it is not a complete drinking-water purifier.
Test the treated-water hardness and monitor regeneration frequency.
| Applications | Whole House Water Softener — converts hard water into soft water |
| Regeneration | Fully Automatic Regeneration System |
| Item Code | AWS6000 |
| Valve Type | AWST |
| Regeneration Mode | Automatic System |
| Resin Volume | 150 Ltr. NSF Certified |
| Flow Rate | 6000 LPH |
| Working Pressure | 7 Kg. Max |
| Power Supply | 220V, 50Hz |
| Inlet/Outlet Size | 1.5" |
| Brine Tank | 200 Ltr. |
| MRP | ₹182,408/- |
52 Verified Reviews